A bright kitchen with a stainless sink

Homeowner guide · Water filtration & treatment

Water Filtration for a New Home: Test First, Then Treat

Test before you filter. On city water, read the utility’s annual water report; on a well, get a certified-lab test. Then buy NSF-certified gear that fits the results.

A new home comes with water you did not choose and equipment you did not buy. The good news: you do not need to guess. This guide shows how to find out what is in your water, which tests matter for a well, how to read your utility’s report and how to pick treatment that is certified for the problem you actually have.

Key takeaways

  • City water: find your utility’s Consumer Confidence Report, delivered every year by July 1.
  • Private well: you are responsible for testing; start with bacteria and nitrate, then add local concerns like arsenic.
  • Use a state-certified lab for health decisions; home strips are for screening.
  • Buy treatment certified to the NSF/ANSI standard for the contaminant you need to reduce.
  • Get written quotes with maintenance costs, and know your three-day right to cancel in-home sales.

Do I need a water filter in my new home?

Maybe not. Many city-water homes only need taste or hardness fixes, while well homes need testing first. Decide after you see test results or your utility’s water report.

Public water systems are regulated under the Safe Drinking Water Act and must meet EPA limits for more than 90 contaminants (EPA). That does not make every glass perfect: old plumbing inside a house can add lead, and many people want less chlorine taste or softer water. Private wells are different. EPA does not regulate them, so the owner decides whether and how to test (EPA).

Where to start
Your situationFirst stepTypical next step
City water, newer homeRead the utility’s Consumer Confidence ReportPitcher or faucet filter for taste, or nothing
City water, home built before 1986Ask the utility about lead service lines; test at the tapFilter certified for lead reduction if needed
Private wellCertified-lab test for bacteria and nitrate, plus local concernsDisinfection, filtration or softening based on results
Spots, scale, dry skinMeasure hardness (grains per gallon)Softener or conditioner
Rotten-egg or metallic smellTest for hydrogen sulfide, iron and manganeseOxidizing filter or aeration system

How do I read my city’s water quality report?

Find your utility’s Consumer Confidence Report online or on your bill, then compare each detected level with the legal limit (MCL). Look for violations, lead results and the source of your water.

Every community water system must send customers a Consumer Confidence Report each year by July 1 (EPA). If you just moved, search your utility’s name plus “water quality report,” or use the EPA CCR page to find it. Here is what to look for.

  • Detected contaminants table: the level found next to the MCL (Maximum Contaminant Level). Below the MCL means the system met the legal limit.
  • Violations: any listed violation, and what the utility did about it.
  • Lead and copper: reported as the 90th percentile of home samples. Lead in your home comes mostly from plumbing, so your tap can differ from the utility average. EPA’s health goal for lead is zero (EPA).
  • PFAS: in 2024 EPA set the first national limits for PFOA and PFOS at 4 parts per trillion. EPA has since announced changes to compliance dates and to some other PFAS limits, so check the EPA PFAS page for current status.
  • Source water: river, lake or groundwater, which hints at taste, hardness and seasonal changes.

Free · no obligation · Water filtration & treatment

Get matched with water filtration & treatment pros near you

1. Your details2. Your home3. Secret code

By continuing, you ask us to text a one-time code to this number from 1-800-633-4427. Message and data rates may apply.

Secure & privateNo costNo obligationConsent on the next screen

What should I test for if the home has a private well?

At minimum, test yearly for total coliform bacteria and nitrate, and add arsenic, lead, radon, uranium or others based on local geology. Use a state-certified laboratory.

If you are still under contract, ask your agent and lender whether a well test is required and who orders it. Some loan programs and many local health departments require one before closing, and lab results can take several days. Even if no one requires it, test before you close so you can negotiate repairs with real numbers. EPA keeps a list of state certification contacts so you can find an accredited lab (EPA).

Common well tests and why they matter
TestWhyHow often
Total coliform / E. coliSignals a path for bacteria into the wellEvery year and after floods or repairs
NitrateEPA limit is 10 mg/L; especially important for infantsEvery year
ArsenicNaturally occurring in many regions; EPA limit is 10 parts per billionAt purchase, then per local advice
Lead and copperFrom plumbing, fixtures or well componentsAt purchase
Hardness, iron, manganese, pHScale, stains, taste and equipment sizingAt purchase
Radon, uranium, PFASRegional concerns; ask your health departmentAt purchase if local data suggests

Keep the paperwork

Ask the seller for past test results, the well log, pump age and any softener or UV manuals. When you sell later, a recent clean test and maintenance records reassure your own buyer.

Which water filter certifications should I look for?

Look for independent certification to NSF/ANSI standards: 42 for taste and chlorine, 53 for health-related contaminants like lead, 58 for reverse osmosis, 44 for softeners and 55 for UV.

Certification is how you know a product does what the box says. Bodies such as NSF, the Water Quality Association, IAPMO and CSA test products to the same American National Standards. A filter certified for chlorine taste (Standard 42) is not automatically certified for lead (Standard 53), so check the performance data sheet for the exact contaminants.

NSF/ANSI standards at a glance
StandardCoversCommon products
42Aesthetic effects: chlorine, taste, odor, particulatesPitchers, faucet and whole-house carbon filters
53Health effects: lead, cysts, certain VOCs, PFOA/PFOSFaucet, under-sink and some pitcher filters
58Reverse osmosis systemsUnder-sink RO units
401Incidental and emerging compoundsSome faucet and under-sink filters
44Water softeners (cation exchange)Whole-house softeners
55Ultraviolet disinfectionUV systems for wells

Hardness is usually reported in milligrams per liter or grains per gallon (1 grain per gallon equals about 17.1 mg/L). Water above roughly 120 mg/L, about 7 grains, is generally considered hard, and above 180 mg/L very hard.

How much does home water treatment cost?

It ranges from a pitcher filter to a whole-house system plus yearly maintenance. Compare installed price, filter or salt costs and service visits over five years, not just the sticker price.

Prices vary widely by region, water chemistry and brand, so the most useful thing you can do is ask every installer for the same breakdown: equipment, installation, permits if required, yearly consumables and expected service. If you are funding a larger project with a home equity line, read our guide to using a home equity line for water upgrades and fold the water system into the same plan as your other first-year repairs.

  • Ask what the system is certified for and get the performance data sheet.
  • Get the five-year cost: installed price plus filters, salt, UV lamps and service.
  • Ask about water and drain needs: RO and softeners send some water to drain.
  • Check whether the previous owner’s equipment can be serviced instead of replaced.
  • Pair the work with other projects, such as a home inspection follow-up plan, so one plumber visit covers more.

How do I avoid water treatment sales scams?

Be wary of free in-home tests that end in a scary demo and a same-day contract. Ask for certified lab results, written quotes and certifications, and know your three-day right to cancel.

  • Color-change or precipitation demos can make safe water look dirty. Ask for lab numbers instead.
  • Under the FTC Cooling-Off Rule, most sales of $25 or more made in your home can be canceled within three business days; the seller must give you a cancellation form (FTC).
  • Be cautious with financing pitched at the kitchen table; read the APR and total cost before signing.
  • Do not let anyone tell you city water fails standards without showing you the utility report or a certified lab result.

A trustworthy installer behaves differently: they test first, put the results and the certification listing in writing, quote the five-year cost including filters and service, and are happy to leave without a signature. If someone discourages you from getting a second quote, get two.

Want a second opinion from a local pro? Use the form below to request help. You will confirm your phone with a one-time code, and only companies in your area that serve water treatment will reach out.

Frequently asked questions

Should I test the water before closing?

If the home has a well, yes: it gives you facts for repair negotiations and may be required by your lender or county. For city water, reading the utility report is usually enough before closing.

How long do well water test results take?

Often several business days, depending on the lab and tests. Order early in the contract period.

Is a water softener a filter?

No. A softener exchanges hardness minerals for sodium or potassium; it does not remove most health-related contaminants. Look for Standard 44 certification.

Is reverse osmosis worth it?

It reduces a wide range of contaminants at one tap and suits homes with specific concerns. It wastes some water and needs filter changes, so compare five-year costs.

Can I keep the previous owner’s system?

Often yes. Have it serviced, check the model’s certifications, and replace filters, resin or UV lamps as the manual specifies.

Who regulates private wells?

EPA does not regulate private wells. Some states and counties set testing rules for sales or new wells, so check with your local health department.

Still shopping and eyeing homes on a well? get pre-approved with room for water treatment costs so the test results never sink your budget.

More homeowner guides

Run a water filtration & treatment business? Bid on water treatment leads from homeowners like these in the Mortgages+ partner marketplace.

Sources

Content reviewed November 18, 2026 against these authoritative sources.

  1. 1.EPA: Consumer Confidence Reports (CCR)
  2. 2.EPA: Private Drinking Water Wells
  3. 3.EPA: National Primary Drinking Water Regulations
  4. 4.EPA: Basic Information about Lead in Drinking Water
  5. 5.EPA: Per- and Polyfluoroalkyl Substances (PFAS)
  6. 6.EPA: Drinking water lab certification contacts
  7. 7.FTC: Buyer’s Remorse: The FTC’s Cooling-Off Rule

Photo: A bright kitchen with a stainless sink on Unsplash (Unsplash License).

Mortgages+ is a marketing platform, not a lender, insurer or service provider. When you request help, we match your request with one participating water filtration & treatment provider serving your ZIP code, who pays Mortgages+ for it. Mortgages+ may receive compensation from some companies featured on this site.

Ready when you are

Tell us a little about your home and we’ll match you with vetted help nearby.

Get matched →